Description
Instant downloadable build plans for a practical one sided wood picnic table.
Ideal when a full standard picnic table is too cumbersome for the area. You can place this table against a wall and use just the one side or when need be, pull it out and place stools or an independent bench along the back.
The structure has a unique design in so much as you can easily dismantle it into four sections by simply removing 6 bolts. It can just as easily be re-assembled again.
Made from 2×4 (50x100mm) and 2×6 (50x150mm) wood, it is 5ft (1500mm long), 30″ (760mm) high, and the table is 22″ (560mm) wide.
Why not make two of them, and when needed, you can place the two together making a double sided picnic table with a very wide tabletop.
When the feast is over, simply pull them apart and place them against a wall so as not to take up too much room.
The downloadable PDF file contains 12 pages of plan drawings including a plan drawing of every single piece, material requirements, pictures, and step-by-step instructions.
MATERIALS
In all you will need:
42ft (13m) of 1-1/2″ x 5-1/2″ (38mm x 140mm) wood.
16ft (4800mm) of 2×4 (50x100mm) wood.
6 only 1/2″ (12mm) galvanized coach/carriage bolts @ 5″ (125mm) long.
4 only 1/2″ (12mm) galvanized coach/carriage bolts @ 6″ (150mm) long.
24 only galvanized bugle head screws or similar @ 5″ (125mm) long.
41 only exterior wood screws @ 3″ (75mm) long.
The plans worked as described.
directions were very clear and precise.
Directions are well done. Look forward to doing this project